大型军事模型是为了满足军事教学基地的教学需求和科技馆、军事展览馆、历史景区的展览需求以及影视剧拍摄的布景需求而产生的专业模型设备。大型军事模型主要包括坦克、装甲车以及战斗机、军舰等军事装备，大小规模一般为1:1等比例还原，也可以按照客户不同的需求做相应的扩大和缩小，做工优良、专业逼真是大型军事模型在制作过程中的基本要求，而为了达到这些要求就需要有一套行之有效、科学严谨的制作步骤，源头厂家现在就带大家了解一下大型军事模型的制作步骤。

Large military models are professional modeling equipment designed to meet the teaching needs of military teaching bases, as well as the exhibition needs of science and technology museums, military exhibition halls, historical scenic spots, and the background requirements for film and television shooting. Large military models mainly include tanks, armored vehicles, fighter jets, warships, and other military equipment. The size and scale are generally restored in a 1:1 ratio, and can also be expanded and reduced according to different customer needs. Good workmanship and professional realism are the basic requirements for the production process of large military models. In order to meet these requirements, a set of effective and scientifically rigorous production steps are needed. The source manufacturer will now take you to understand the production steps of large military models.

一、骨架的制作

1、 The production of skeleton

接到客户的订单要求后，首先由设计人员进行大型军事模型的设计，这是工人师傅的制作说明书。拿到图纸之后，师傅们会根据图纸将所需要的不同长度的50mm50mm*2.0mm的方钢裁切出来，然后将其焊接成为大型军事模型的骨架。

After receiving the customer's order requirements, the first step is for the designers to design a large military model. This is the production manual provided by the master worker. After receiving the drawings, the masters will cut out different lengths of 50mm, 50mm * 2.0mm square steel according to the drawings, and then weld them into the skeleton of a large military model.

二、对骨架进行铁艺蒙皮

2、 Iron clad skeleton

在骨架制作完成后，师傅们会根据骨架的平面分布，选择合适大小的的2mm厚的镀锌板进行焊接蒙皮工作，并在镀锌板与框之间采用铆接法连接，以确保大型军事模型有足够的强度和刚度。

After the completion of the skeleton production, the masters will select 2mm thick galvanized sheets of appropriate size according to the planar distribution of the skeleton for welding skin work, and use riveting method to connect the galvanized sheets and frames to ensure that the large military model has sufficient strength and rigidity.

装甲车军事模型完成蒙皮工作图

Armored vehicle military model completed skin working diagram

三、喷涂底漆腻子并打磨接缝

3、 Spray primer putty and polish the joints

在铁艺蒙皮环节结束后，涂抹专业适用于大型军事模型的腻子，反复涂抹以达到理想的要求。等待腻子自然风干后，要在接缝处涂抹纤维材料并进行打磨，为了大型军事模型表面的光滑平整，要用打磨机对腻子进行打磨。

After the ironwork skinning process is completed, apply professional putty suitable for large military models and repeat the application to achieve the desired requirements. After waiting for the putty to air dry naturally, fiber material should be applied to the joints and polished. In order to achieve a smooth and even surface of the large military model, a polishing machine should be used to polish the putty.

坦克军事模型完成涂抹腻子工作图

Tank military model completed putty application work diagram

四、喷涂外观并完善细节

4、 Spray the appearance and perfect the details

最后，根据客户的具要求，采用汽车漆对大型军事模型的外观进行喷绘，可根据需求喷涂字样和logo，并调节相应的细节。

Finally, according to the customer's requirements, automotive paint is used to spray paint the appearance of the large military model. Words and logos can be sprayed according to the needs, and corresponding details can be adjusted.